PT Avocet Bolaang Mongondow (PT ABM) a gold mining company located in Lanut, East Bolaang Mongondow, North Sulawesi, to support its operations is inviting for the following positions:

Mechanical Maintenance Trainer

Essential Requirements:
- Must possess at least STM, Associate Degree or Bachelors Degree in Mechanical Engineering or Equivalent.
- In possession of certificates in Mechanical Training
- Preferred experience in similar position – 4 years.
- Has a good command of English, both written and oral.
- Possess strong leadership and team building skills.
- Must be computer literate.
- Have a will to develop knowledge and work skills.
- Able to work in a team to reach the target.
- Be pro-active on the floor shop, help workshop crew doing practical job properly, troubleshooting, etc
- Need to be aware of, to work with and pass on the companies’ safety and environmental standards.

Experience:
- Experience minimum 4 years as a Maintenance Trainer.
- Proven experience to develop a training module.
- Ability to develop Matrix charts, schedule candidates for training and maintain a recording system.
- Experience in training work procedures and safety policies are a must.
- OEM training experience for Tamrock, CAT, Volvo, Light Vehicles and Trucks will be an advantage.
- Experience with Apprentice Training Schemes.

Job Description:
This is a staff position “Mechanical Maintenance Trainer”, and will require a self starter to continue developing existing training formats and to continue with the ongoing training of our mechanical staff and apprentices, with an emphasis on safety and good work practices.

Single accommodation is offered with a roster of 5 weeks work and 2 weeks off, with an attractive salary and benefits to the successful candidate.

Senior Fixed Plant & Mobile Maintenance Planner

Essential Requirements:
- Must possess at least Senior Technical High School recognized Industry Trade qualifications, Associate Degree or Bachelors Degree in Mechanical Engineering or Equivalent
- Minimum 4 years experience as Maintenance Planner, having experience on both Fixed Plant and Mobile Maintenance Planner is preferred
- The candidate should experience in planning of mechanical & high volt electrical in the mining industry, and familiar with Fixed Plant equipment(Vessel/Tank, Pump, Agitator, Genset, Compressor,etc) and Mobile Maintenance Equipment (Excavator, Dozer, Grader, Dump Truck, Drilling Machine, Dewatering Pump, Lighting Plant, Light Vehicle, etc)
- Having strong motivation, able to lead, organize and provide direction to Maintenance Planner, good in reporting, information monitoring & planning/organizing, supportive, communicative, and able to work under pressure are preferred character traits
- Has a good command of English, both written and oral.
- Must be computer literate.
- Have a will to develop knowledge and work skills.
- Able to work in a team to reach the target.
- Be pro-active on the floor shop, advice workshop supervisors about Planning System
- Need to be aware of, to work with and pass on the companies safety and environmental standards.

Job Description:
This is a staff position “Senior Fixed Plant & Mobile Maintenance”, and will require a self starter to fully support, implement and refine ABM planning system & objectives, play a highly role in guiding and coaching Maintenance Planner to ensure position description achieved and refined, ensure site component forecasting is through and completed promptly; lead, organize and provide direction for all Planning team. Actively communicate and support Maintenance Manager & Senior Maintenance Supervisors (Fixed Plant, High Voltage Electrical, and Mobile Maintenance) to ensure all maintenance problems are identified and corrective actions in place; actively contribute to a positive teamwork environment at all times; communicate openly and honestly at all times, with an emphasis on safety and good work practices.

Single accommodation is offered with a roster of 5 weeks work and 2 weeks off, with an attractive salary and benefits to the successful candidate.

All candidates are required to demonstrate the above skill requirements at their interview.

Potential candidates please send your resume by 20th of September 2010 to:

HR – Recruitment
Kantor Perwakilan PT Avocet Bolaang Mongondow
Kompleks Ruko Mall Megamas Blok BII No.16
Jl. Piere Tendean – Boulevard Manado,
Sulawesi Utara – 95111
Please put the position applied (“Mechanical Maintenance Trainer” or ”Senior Fixed Plant & Mobile Maintenance”) at the right corner of the envelope

Or

e-mail: recruitment@avocet.co.id
Please put the position applied (“Mechanical Maintenance Trainer” or ”Senior Fixed Plant & Mobile Maintenance”) as the subject of the mail

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

PT Newmont Nusa Tenggara (PTNNT) operates the Batu Hijau copper/gold mine in West Sumbawa, West Nusa Tenggara Province (NTB). PTNNT is committed to becoming a leader in safety, environmental stewardship and social responsibility. The Company is inviting skilled, trained, highly committed and dedicated Indonesian professionals to be part of our team in Sumbawa for the position:

MEN0012-ENGINEER GEOTECHNICAL

Responsibility
Carry out and supervise day-to-day geotechnical activities to support the Batu Hijau project area, including slope performance assessment, slope instrumentation monitoring evaluation and reporting, slope hazard assessment risk assessments, maintaining communication protocols, carrying out technical stability assessments and associated reporting, recommending remedial slope designs and assessing their implementation, updating and developing relevant procedural controls.

Qualification:
• BS Degree in Geology, Mining, Geological Engineering or Civil Engineering with at least (3) years of related experience.
• Ability to use geotechnical engineering software such as Dips, Slide and SlopeW.
• Ability to operate numerical modeling software such as FLAC, UDEC and Phase 2.
• Technical knowledge of geotechnical and hydro geological engineering is required.
• Experience with geotechnical monitoring data interpretation.
• Experience specifically related to mining project development is necessary. This may include WRD, open pit rock mechanics and waste management facilities
• The candidate should have a strong technical design background in geotechnical analyses and must be able to work within multidisciplinary teams.

All applications will be treated confidentially and must be sent no later than 7 days after the publication of this advertisement. Please specify position name and code you are applying for on the top right corner of your application letter Only short listed candidates will be contacted.

Send your application letter to:
HR Recruitment – PT Newmont Nusa Tenggara
JI. Sriwijaya No. 258, Mataram 83126, NTB, Inlowongan kerja ….. informasi lowongan pekerjaan terbaru …. lowongan kerja karyawan ….. pekerjaan terbaru hari inidonesia PO. BOX 1022
Fax: 0370-636318 Ext. 48042, e-mail: PTNNT.Recruitment@nnt.co.id

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

Eni is a major integrated international oil and gas company based in Italy, with interests in 70 different countries, and employs some 73,000 people worldwide. Eni has been exploring and producing hydrocarbons for almost eighty years.

Eni has Exploration & Production activities in Italy, West and North Africa, US, South America, North Sea, Kazakhstan and Asia. Eni Indonesia participates in eleven PSCs in Indonesia, Including nine in Deep Water, and is pursuing an active exploration and development program.

Senior Reservoir Engineer
Position requirements
A Master University degree in Petroleum Engineering or equivalent is a prerequisite. You should have at least 10 years in Oil & Gas industry as Reservoir Engineer Including experience working at rig site. Experience Interfacing with authorities representatives and partners is desirable. You are required to be skillful in standard software such as office Suite and having practical experience using reservoir engineering software packages (i.e. Petrel, E100, E300, IPM, MBAI and Crystal Ball for risk analysis).

You must be a good communicator with highly effective multi-disciplinary team working skills and demonstrate experience coaching and leading lets experienced reservoir engineers. Good technical and analytical skills, strong Influencing and presentation skills as well as effective communication and performance bias area plus. Fluency in Bahasa Indonesia and English is a must.

Position responsibilities
Your role will involve building reservoir models and carry out simulations to evaluate the possible development scenarios and associated reserve profiles, ensuring the reliability of data and calculations, defining and optimizing the data required for Reservoir Engineering studies, validating the data collected and the relevant laboratory analyses results (Including CCA,SCAL PVT and transient well test data), designing and analyzing oil and gas flow and pressure build-up well tests, the definition of the data collection/analysis and in the optimization of the development/production scenarios.

In addition, the role Involves cooperating with Reservoir Geologists, Petroleum/Facilities Engineers and Economic Evaluators in the construction of integrated reservoir models, preparation of Plans of Development for site company’s assets and actively participating in the presentation so the authorities and supporting the preparation of Technical Committee Meetings and interface wish partners on SS technical aspects.

Please apply for this advertisement to:

PO Box 3260
Jakarta 10000

Please nose that applications may not be reviewed if received after the 1st of October 2010.

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

PT. Bank Tabungan Negara (Persero) Tbk. membuka kesempatan bekerja untuk mengisi posisi Sekretaris pada Kantor Cabang dan Kantor Pusat (Divisi) dengan persyaratan sebagai berikut :

SEKRETARIS

Persyaratan:

* Wanita, WNI
* Berpenampilan menarik, tinggi badan min. 160 cm, berat badan prosorsional
* Usia maksimal 25 tahun & belum menikah
* Pendidikan minimal D3, diutamakan jurusan Sekretaris atau Kehumasan
* IPK minimal 2,75 (skala 4,00)
* Mampu berkomunikasi dalam Bahasa Inggris (minimal pasif)
* Mampu mengoperasikan komputer, minimal MS Office.

Bagi yang berminat dan memenuhi persyaratan tersebut di atas, dapat mengirimkan surat lamaran dengan melampirkan dokumen sebagai berikut :

* Pasfoto berwarna ukuran 3×4
* Foto seluruh badan ukuran postcard
* Curriculum Vitae
* Fotocopy ijazah terakhir dan transkrip nilai yang dilegalisir
* Surat keterangan sehat dari Rumah Sakit/Puskesmas
* Fotocopy akte kelahiran
* Fotocopy kartu keluarga

Berkas lamaran dimasukkan ke dalam amplop berwarna cokelat dengan membubuhkan kode SEKRETARIS pada sudut kanan atas amplop dan diantar langsung ke :

Human Capital Division,
Menara Bank BTN Lantai 9
Jl. Gajah Mada No. 1
Jakarta Pusat.

Berkas lamaran harus sudah diterima oleh HCD Bank BTN selambat-lambatnya tanggal 24 September 2010

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

PT Mustika Citra Rasa (Holland Bakery) is the biggest and well known Bakery with more than 150 outlets in Indonesia which currently needs a professional to fill the position of: Senior Technical Manager in our central factory (Head office) in Jakarta.
Senior Technical Manager

Qualification:

1. Minimum Bachelor Degree in electrical or mechanical engineering from a reputable university with min. GPA of 3.00.
2. Has minimum 5 years experience as Technical Manager in manufacturing company, preferably food industry.
3. Must have hands-on experience in Total Productive Maintenance.
4. The position requires somebody who is assertive, possess good time management, has sound analytical problem solving, forward planning and excellent leadership, teamwork and communication skill.
5. Efficiency in computer skills, with proven competency in using Microsoft Office.

Successful candidates will be offered attractive remuneration package commensurate with skills and experience.

If you meet the requirements above, please send your CV/Resume along with your certificate, academic transcript, expected and current salary to

mcr.recruitment@gmail.com

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

To us, innovation and quality are facts of life. By employing the latest technology and expertise, we make an ongoing investment in the development of new products and processes, and in the quality improvement of our existing products.

We have a long history of successful innovations and comprehensive industrial activities which have rewarded us a practical understanding of many different technologies. However, we also believe that innovations, quality products, technical services and reliability are more than just a sophisticated accomplishments resulted from technical know-hows in Research and Development. They have meaningful impact to our day-to-day operations, to our commitment to customers, to our dedication to quality, and to meeting the requirements of the job.

Now we are looking for successful candidate for :
UTILITY SP INTENDENT

Persyaratan :

* Laki-laki, maks. 35 thn
* S1 Tehnik Mesin dari universitas ternama dengan IPK min 2.8
* Mempunyai pengalaman di bidang Utility minimal 5 tahun khususnya genset, chiller, compressor, power distribution dari perusahaan yang ber-operasi 24 jam terutama dari perusahaan kertas/plastic atau industri lainnya yang sudah menjalankan ISO
* Mempunyai pengalaman memimpin suatu unit/group dan sudah terbiasa dengan program 5R, TQM

Send your complete CV to :

virgo@arghakaryaoffice.com

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

Kami perusahaan yang bergerak di bidang rangka atap baja ringan membutuhkan tenaga:
Estimator / Drafter

Kualifikasi:

* Pria / Wanita
* Min D3 Teknik, atau diutamakan dari Teknik Sipil
* Menguasai AutoCAD
* Berpengalaman di perusahaan baja ringan
* Mempunyai kendaraan sendiri
* Bersedia ditempatkan di luar kota

Scope of work:

* Dapat membuat dan menyusun RAB
* Dapat membaca gambar & aplikasi dalam AutoCAD

Jika anda memenuhi kualifikasi di atas, kirimkan CV lengkap anda ke :

philips@cppilar.com

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

Pura systems international adalah perusahaan yang bergerak di bidang supplier untuk industrial dengan spesialisasi di bidang energy efisiensi, alat kontrol polusi dan filtrasi, untuk menunjang perkembangan perusahaan,kami membutuhkan teknisi handal, dinamis serta memiliki komitment kerja yang tinggi, dengan kualifikasi:
Teknisi

Requirement

* Diploma jurusan Listrik/ Mekanik
* Berpengalaman sebagai teknisi minimal 2 tahun
* Mampu melakukan analisa dan smart working
* Bisa membaca gambar teknik
* Mampu mengoperasikan computer

Silakan kirim surat lamaran disertakan cv dan photo anda yang ditujukan ke alamat email ke

info@purasystems.co.id

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

PT. Lion Super Indo is one of a fast growing retail company in Indonesia. We are part of international supermarket chain, Delhaize Group, which is an international food retailer with activities in 5 countries and 3 continents: The United States, Europe and Asia. With 66 stores in Indonesia, Super Indo focuses on fresh offering and efficiently run neighborhood stores. To cope with our rapid growth and international expansion, we are inviting well-trained high potential professionals to join our operation in Indonesia for the following positions:

SECRETARY (SEC–D)
Qualifications :

* Diploma degree: Secretary or Bachelor degree: all major
* Fresh graduate or min. 2 years experience for expatriate
* Proficient in MS. Office
* Able to work under tight deadlines and multi task
* Active English (verbal & written)

RETAIL MANAGEMENT TRAINEE (RMT–D)
Qualifications :

* Bachelor degree: all major
* Fresh graduate/max. 2 years experience
* Interested in a challenging career in store management
* Challenging: business sense, leadership, personal development
* Located in all branches, shift-based
* One year program will be located in Jakarta

Please send your complete application letter and CV to :

Recruitment Department PT. Lion Super Indo
Jl. Ancol I No. 9-10, Ancol Barat, Jakarta Utara
Or
recruitment@superindo.co.id

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com

PT Synergy Engineering, an Engineering Consultant specializing in providing technical services to major Oil & Gas companies in the Asia Pasific region. Our clients include major Oil & Gas Operators, EPIC Contractors and independent fabricators.

We have an established reputation with a strong and ever-growing team, providing good quality, fit-for purpose, engineering solutions. We believe in prioritizing technical competence and focus on delivering services to meet our Client’s expectations, is currently seeking Indonesia s young professionals with high motivation and strong determination for the following positions:

LEAD PROCESS ENGINEER (LP-ENG)

• University degree in Chemical Engineering, with at least 15 years of process design and implementation experience of which a minimum of 10 years in oil and gas facilities experience
• Strong technical/engineering skills with thorough knowledge of applicable Codes and Standards plus a working knowledge of other discipline activities
• Experience that encompasses both operations and projects. Specific participation in a similar role for at least one major oil and gas project
• Demonstrated ability to interface within a multi-discipline environment, and motivate and manage personnel from a position of influence
• Experience in organizing and supervising process/facilities engineering
• Good verbal and written communication skills in the English language
• Ability to cope in a positive and productive manner within a high-pressure environment, while handling a large amount of detail as expected in large Projects with aggressive schedules
• Good interpersonal skills, with the ability to forge productive working relationships with all personnel
• Willingness to go where the work is during the various Project phases

LEAD MECHANICAL/PIPING ENGINEER

• Must possess minimum in mechanical engineering
• Strong technical/engineering skills with a thorough knowledge of applicable Codes and Standards plus a working knowledge of other discipline activities
• At least 15 years of experience in piping design and participating/managing piping fabrication, testing, and completion/commissioning/start-up efforts for the offshore oil industry. Project experience includes responsibility for defining the scope of work, schedule, budget and project execution plan as related to piping design/drafting requirements
• Extensive knowledge of Codes and Standards related to piping design
• Experience that encompasses both operations and projects. Specific participation in a similar role for at least one major oil and gas project
• Demonstrated ability to interface within a multi-discipline environment, and motivate and manage personnel from a position of influence
• Experience in organizing and supervising process/facilities engineering
• Good verbal and written communication skills in the English language.
• Ability to cope in a positive and productive manner within a high-pressure environment, while handling a large amount of detail as expected in large Projects with aggressive schedules
• Good interpersonal skills, with the ability to forge productive working relationships with all personnel
• Willingness to go where the work is during the various Project phases

LEAD ELECTRICAL ENGINEER (LE)

• University degree in Electrical Engineering, with at least 10 years of electrical implementation experience in oil and gas facilities.
• Strong technical/engineering skills with a knowledge of applicable Codes and Standards plus a working knowledge of other discipline activities.
• Demonstrated ability to interface within a multi-discipline environment, and motivate and manage personnel from a position of influence
• Broad knowledge of electrical equipment, manufacturers and system suppliers.
• Knowledgeable and practical experience with emergency electrical system requirements and design, and requirements for hazardous area certification and hazardous area equipment selection.
• Experience in organizing and supervising electrical engineering and technician teams in design, installation and commissioning.
• Good verbal and written skills in the English language.

LEAD PIPING/PDMS DESIGNER (LP-DGR)

• Must possess minimum an Engineering DRAFTING Certification/Diploma
• Strong technical/engineering skills with a thorough knowledge of applicable Codes and Standards plus a working knowledge of other discipline activities
• At least 15 years of experience in piping design and participating/managing piping fabrication, testing, and completion/commissioning/start-up efforts for the offshore oil industry. Project experience includes responsibility for defining the scope of work, schedule, budget and project execution plan as related to piping design/drafting requirements
• Extensive knowledge of Codes and Standards related to piping design
• Good verbal and written communication skills in the English language.
• Ability to cope in a positive and productive manner within a high-pressure environment, while handling a large amount of detail as expected in large Projects with aggressive schedules
• Good interpersonal skills, with the ability to forge productive working relationships with all personnel
• Willingness to go where the work is during the various Project phases

LEAD INSTRUMENT ENGINEER (LI)

• University degree in Electrical, Electronic or Physics Engineering or equivalent, with at least 10 years of oilfield experience working for either a major oil company and/or contractor.
• Strong technical/engineering skills with a knowledge of applicable Codes and Standards plus a working knowledge of other discipline activities.
• Large, integrated project experience in an international setting. Operational experience is preferred in order to feed field experience back into the project.
• Demonstrated ability to interface within a multi-discipline environment, and motivate and manage personnel from a position of influence
• Broad knowledge of electrical equipment, manufacturers and system suppliers.
• Knowledgeable and practical experience with emergency electrical system requirements and design, and requirements for hazardous area certification and hazardous area equipment selection.
• Experience in organizing and supervising electrical engineering and technician teams in design, installation and commissioning.
• Good verbal and written skills in the English language.

SENIOR PROCESS ENGINEER (SP-ENG)

• Must possess bachelor degree in Chemical Engineering with at least 5 years of oil and gas experience
• Strong technical / engineering skills in a multi-discipline arena
• Hands on experience in handling Process Engineering software
• Familiar with international codes and standards applicable in Oil and Gas industry
• Enough supervisory skill to manage a team
• Able to co-ordinate within the discipline and other disciplines
• Good verbal and written communication skills in the English language

INSTRUMENT ENGINEER (IE)

• Having Bachelor degree in physic Engineering Discipline from Reputable University
• Minimal 5 years experiences in project, Engineering and Design, Construction of Process Control and Instrument for Oil and Gas
• Required skill (s): Project Development, Production Enhancement in Construction, Engineering and Proposal, Control and Instrument System
• Familiar with international codes and standards applicable in Oil and Gas industry
• Enough supervisory skill to manage a team
• Able to co-ordinate within the discipline and other disciplines
• Good verbal and written communication skills in the English language

SENIOR STRUCTURAL ENGINEER (SCE)

• Must possess Bachelor degree in Civil engineering from recognized university or institution
• Must possess 5 – 7 years experience in oil and gas industry
• Shall possess experience in handling engineering software
• Strong technical/engineering skills and knowledge of codes and standards in the civil area, plus a working knowledge of other discipline activities.
• Should have a strong motivation and effort to work
• Good interpersonal skills, with the ability to forge productive working relationships with all personnel.
• Ability to cope in a positive and productive manner within a high-pressure environment, while handling a large amount of detail as expected in large Projects
• Good verbal and written communication skills in the English language

JUNIOR PROCESS ENGINEER (JPC-ENG)

• Must possess bachelor degree in Chemical Engineering from recognized university or institution
• Fresh Graduate are welcome
• Experience in handling engineering software
• Should be a fast learner and a team worker
• Should have a strong motivation and effort to work
• Good verbal and written communication skills in the English language

DOCUMENT CONTROLLER (DC)

• Female / Male
• Maximum age 25 years old
• Candidate must possess at least a diploma degree, preferably in Management discipline
• Fresh Graduate are welcome
• A strong skill in computer literate
• An Honest, Energetic, Office work ethics, trustworthy & Confidence
• Ability to communicate well with people at all levels
• Able to co-ordinate within the discipline and other disciplines
• Should be a fast learner and a team worker
• Good verbal and written communication skills in the English language

To apply, should submit the application letter and CV to hrd@ptsynergy.co.id / recruitment@ptsynergy.co.id with detailed resume and recent photograph and put job title name on subject email.

PT. Synergy Engineering
Jl.Nusa Loka Blok C1/03 sektor XIV-4
BCD-City Tangerang 15318 (sebelah kampus BSI)

or

hrd@ptsynergy.co.id
recruitment@ptsynergy.co.id

Informasi Lowongan Pekerjaan @ Idlowonganpekerjaan.com